Interim model railway update

Phoenix Yard (Mark 1)

With the success of the recent Great Model Railway Challenge TV programme, as aired on Ch 5, together with the upcoming Warley Model Railway Show at the NEC I decided to build a very simple “shunting plank” layout to try to draw visitors to the SLS stand. Have it available so that they can see what can be done and have a go. Whether they want to take on the whole shunting puzzle exercise is immaterial, ideally yes but even a trial go will be progress.

We can sell the Society and our published material if the passing visitors stop and engage. The hardest part getting that break of step for the initial pause as they walk by.

The fact that it also gives me an option for a small portable fun layout for home use too is the bonus. The final choice of base is a simple 4ft x 1ft piece of shelf timber I had in stock. In the build I had tried the Plum Hollow base, useable but with issues, and adapting another piece of existing potential layout board (a recycled DIY table top). The latter almost made it, as a folding version, but with a slight modification for use as the fold would have been through a point. It was only the time for the extra woodwork for the hew half that killed the idea. A Mark 2 iteration with full scenery may well appear for Alexandra Place and York.

Why Phoenix Yard? The reason is almost everything on it is recycled from other projects. I have taken the basic “Inglenook” 8 wagon (5-3-3) format for the scenic side and added two small sidings in to a  hidden section. This allows for a single coach workmen’s train to appear. It also allows alternative locomotives to be swapped in/out.

The longest spur, for the 3 wagons plus locomotive, can accommodate engines up to a Bo-Bo diesel or an 0-6-0 tender locomotive. As the shorter locos would allow cheating with 4 wagons a moveable velcroable buffer stop may be incorporated.

As a comparison with the GMRC project of 24 hours of building, the track is partially down as I write this. Time spent, excluding pre-planning, about 3 hours to paint the base, juggle the track until I was absolutely satisfied with its position, and fixing it down.

Draft view of the layout

The track laid out before the board was painted. To the left the public area/ working zone, on the right the hidden/fiddle area.

Plum Hollow

As part of the above exercise the base earmarked for Plum Hollow project was manoeuvred around the house and tried in the car. This indicated that the project will have some issues in moving it around if proceeded with but will just fit round the corner in the staircase. It was this problem that led to evaluating the folding base for a larger version of the Phoenix Yard build.

New cars

Our old Zafira developed an engine problem that meant we had to change it quickly. We now have much smaller Vauxhall Corsa. One immediate issue for Plum Hollow will be working out exactly how high the scenery can be. The board will fit (just) as a bare carcass if the rear seat is down flat but with the rake on the back of the driver’s seat any added height will be critical.

With regard to new cars as always there is progress and regression, as examples, the DAB radio is excellent for sound but requires more retuning than older FM sets to switch masts to get local radio as you travel cross-country; there is no CD option, and most importantly, the supposedly anti-dazzle rear view mirror is useless at night, the old flip type worked these don’t!!

 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.